- Home
- Resources
- Live demo center
Try working versions of the systems we install in your browser: arm the alarm panel, test the fire detector, turn the camera, open a door with a card.
13 working demos
Each demo is modeled on how the real devices behave. Sound is low and can be turned off; camera or microphone permission is requested only when you press a button, and no data leaves your device.
Choose a demo above; the demo you choose opens here.
Try it live
When systems work together
Your alarm, cameras, lighting, siren, locks and phone are linked in a single scenario. Choose an event: the sensor detects it, the cameras turn toward it and follow the person, the floodlights switch on, the siren sounds a warning, you get a notification with a photo on your phone, and the doors stay locked.
Choose an event and watch how the systems trigger each other:
- DetectsMotion sensor
- Turns, followsCameras
- Lights upFloodlights
- WarnsSiren and announcement
- NotifiesYour phone
- LocksDoor and barrier
Desa SecurityArmed
PersonCAM1 GARDEN- CamerasRecording
- FloodlightsOff
- SirenSilent
- DoorsLocked
Event log
- Choose an event; each response is logged here to the second.
This is a demo simulation; it is not connected to a real device. During installation, we set up with you which event triggers which response; the choice of devices depends on the site.
Let's combine your alarm, cameras and locks in a single scenario.
Get a quote for an integrated systemTry it live
Control the camera yourself
Just like in a monitoring app: pan the rotating (PTZ) camera with the controller or by dragging the image, zoom in, go to presets and start a patrol tour. Switch to the four-way split screen and change channels. If you like, try motion detection with your own camera.
Fixed camera: digital zoom and panning within the zoomed area only.
Motion detection with your own camera
The image is processed only in your browser; it is not sent anywhere and is not saved. Camera permission is requested only when you press the button.
Once your camera is on, wave your hand in front of it: the moving area is marked with a box and written to the event log.
- No motion events yet.
This is a demo simulation. The camera frame is a sample photo; motion detection runs entirely on your device and the image is not sent anywhere.
Let’s plan this system for your own space.
Get a quote for Security CamerasTry it live
Test the fire panel
Test a smoke detector on the floor plan: smoke rises, the detector LED lights up, the panel goes into alarm, the sounders go off and the evacuation announcement starts. Then silence it in the same order as on a real panel, wait for the smoke to clear and reset. Try an open circuit and a fault condition too.
- Fire
- Fault
- Sounder silenced
- Buzzer silenced
- Power
- Test
Zones fire · fault
- B1 Entrance lobby
- B2 Corridor
- B3 Offices
- B4 Kitchen and boiler room
Tap a detector: test smoke is released. Silence sounder and Reset require switching with the key to Level 2first.
Panel event log
- System normal. No events yet.
This is a demonstration simulation; it is not connected to a real device and no data leaves your device.
Let’s plan this system for your own space.
Get a Fire Alarm quoteTry it live
Use the alarm panel yourself
It works like a real alarm panel: arm the system with your code, listen to the exit delay, open the door and enter the code before the entry delay runs out. If a window is opened, the alarm sounds instantly and a notification arrives on your phone.
- Ready
- Armed
- Fault
- Power
Demo user code: DESA (3372)
Home · Alarm
Bypassed
Event log
- No events yet. Use ARM + 3372 (DESA) to arm the system.
This is a demonstration simulation; it is not connected to a real device and no data leaves your device.
Let’s plan this system for your own space.
Get a quote for Burglar AlarmTry it live
Measure your internet speed now
This test is real: it measures latency, download and upload speed between your browser and our website’s server. From the result, we calculate how many security cameras you could watch at the same time on this connection.
- Green: link is up; blinking means data is flowing
- Orange: the device is powered over the cable via PoE
- Blue cable: cameras and access points; yellow: computers; red: internet line
How many cameras can this connection handle?
Calculated when you start the test. Main stream per camera: 4 MP, H.265, 25 fps ≈ 4.1 Mbps.
The test takes about 10 seconds and uses up to 30 MB of data. On mobile data, this counts against your data allowance.
The measurement is made to the Cloudflare data center nearest you; Wi-Fi, downloads running at the same time and your device all affect the result. For the most accurate result, try it on a wired connection. Camera bit rates are taken from manufacturers' recommended tables (25 fps, main stream), and 80% of the line is assumed to be usable; the figures are estimates.
Get a quote for this systemTry it live
How much would a panel on your roof produce right now?
The sun’s real position in Şanlıurfa is calculated at every moment. Change the system size, tilt and direction; move the time and season and watch where the energy flows throughout the day.
The sun’s position and clear-sky irradiance are calculated with astronomical formulas (Şanlıurfa, 37.17° N · 38.79° E). The current value assumes a cloudless sky; daily and annual values are scaled by average monthly weather and, in line with PVGIS, give about 1,600 kWh/kWp for a system facing south at 30°. Home consumption is a typical household profile. For an exact figure, we inspect your roof on site.
Get a quote for this systemTry it live
Control your home from your phone
Dim the lights, close the curtains, set the temperature, and the home responds instantly. Automations run on today’s real sunset and sunrise times in Şanlıurfa.
Drag the time past sunset: the automation closes the curtains and turns on the lights.
—
- At sunsetLiving room 70%, kitchen 50% · all curtains close
- 23:30Night: all lights off, thermostat 20 °C
- At sunriseBedroom and children’s room curtains open
Sunrise and sunset are calculated astronomically for Şanlıurfa; the time is Türkiye time. The app is a simulation modeled on the layout of real smart home apps; the app you will use after installation depends on the system chosen. No data is sent.
Get a quote for this systemTry it live
Make an announcement in your school, and choose the zone yourself
Schoolyard, corridor or cafeteria: choose the zone, let the chime play, then make the announcement in your own voice or by typing. When the announcement starts, the background music lowers automatically and comes back when it ends.
—
- Period 108:30–09:10
- Period 209:20–10:00
- Period 310:10–10:50
- Period 411:00–11:40
- Period 511:50–12:30
- Period 613:10–13:50
- Period 714:00–14:40
- Period 814:50–15:30
The microphone turns on only when you allow it. Your voice is played through this device's speaker with the echo of the zone you chose; it is not recorded or sent anywhere. Headphones are recommended to avoid echo. You can hold down the space bar on your keyboard.
The text is read aloud with this device’s English voice.
Choose the zones, then announce by microphone or by text.
The sound is generated in this browser: the chime, bell and music are synthesized, the microphone sound is played with the echo and speaker tone of each zone, and text announcements are read out in your device's Turkish voice. No sound is recorded or sent. The bell schedule is a typical school day; in a real system, weekly and holiday calendars are set up.
Get a quote for this systemTry it live
Scan your card, open the door
Drag one of the cards to the reader. An authorized card unlocks the door; an unauthorized or expired card is rejected. Grant access from the management panel and try again, or switch to card + PIN mode.
Cards
Ayşe Yılmaz’s PIN: DESA (3372)
Management panel · Door 1 permissions
| Person | Access | Validity |
|---|---|---|
| Ayşe YılmazStaff · 003372 | ||
| VisitorGuest card · 000311 | ||
| Mehmet DemirSubcontractor · 000207 |
Access log
- No entries yet.
This is a demonstration simulation; it is not connected to a real device and no data leaves your device.
Let’s plan this system for your own space.
Get a quote for Access ControlTry it live
Watch your fleet live
Four vehicles are on the roads of Şanlıurfa, with time sped up. Select a vehicle to see its speed, ignition status, today’s route and its trail. An alert appears when the speed limit is exceeded, when a vehicle leaves its permitted zone, or when the ignition is turned on or off.
Alerts and events
- No events yet.
Vehicles
Trip details
This is a demo simulation: the vehicles, drivers and locations are examples; the map is simplified to district boundaries and does not connect to an external map service.
Let’s plan this system for your own space.
Get a quote for Vehicle TrackingTry it live
Cut the power and see what the server room does
When you press the button, the mains power goes out: the UPS switches to battery and sounds an alarm, the remaining time counts down, and the room heats up once the air conditioner stops. The generator takes over within a few seconds.
Mains on · air conditioner running · all devices powered through the UPS
- System normal. Mains 230 V, UPS online.
This is a simulation; time runs at the speed you choose. The alarm pattern follows common UPS behavior: four beeps every 30 seconds on battery, and a continuous tone when the battery is about to run out. The values are for a sample 6 kVA UPS and a small server room.
Get a quote for this systemTry it live
The same clear picture in every apartment of your building
From the dish and antenna on the roof, a separate line runs down to each apartment through the multiswitch and floor splitters. Choose an apartment and browse the channels; then create a fault and watch how the technician finds and fixes the problem.
Tap an apartment to see the signal at its outlet and its TV.
The level and quality values are sample measurements; the real values depend on cable length, the number of splitters and the satellite frequency. During installation we measure every outlet with a meter and record the results in the handover report. Channel names and images are examples.
Get a quote for this system
Which system is right for you?
Let’s plan the system you tried for your own space together; contact us for a site survey and a quote.